Relay Pack for Line-voltage FCU: 90 to 277 VAC 50/60 Hz, 2/4 Pipes, SER models, 4 Inputs, On-Off, 1 H/C output, 1 cool output, 3 fan outputs

Next product

Relay Pack for Line-voltage FCU: 90 to 277 VAC 50/60 Hz, 2/4 Pipes, SER models, 4 Inputs, On-Off, 1 H/C output, 1 cool output, 3 fan outputs

SE7000 Fan Coil Unit Application Guide (4.1 MB)
Product Comparison Guide SE8000 and SE7000 Series Room Controllers (12.1 MB)
Room Controllers SC3000 Relay Pack (627 kB)
SC3000 Series Line Voltage Switching Relay Pack Controllers Installation Guide (3.3 MB)

RELPK SER 1H/1C 1C 4IN3FO

Accessory Type	Relay Pack
Application	Low Voltage Fan Coil
Brand	Schneider Electric
By Schneider	Yes
Communication	Stand-Alone (Network Ready)
Dehumidification Setpoint Range	30 to 95 RH
Dimensions Depth	33 mm (1.3 in)
Dimensions Height	122 mm (4.80 in)
Dimensions Weight	0.75 lb (0.34 kg)
Dimensions Width	80 mm (3.15 in)
Humidity Control	No
Humidity Sensor and Calibration	Single point calibrated bulk polymer type sensor
Humidity Sensor Precision	Reading range from 10 to 90% RH non-condensing. 10 to 20% precision: 10%; 20% to 80% precision: 5%; 80% to 90% precision: 10%
Humidity Sensor Stability	Less than 1.0 yearly, typical drift
Operating Humidity	0 to 95 RH non-condensing
Operating Temperature	0 to 50 C (32 to 122 F)
Power Input Tolerance	Plus or minus 10%
Power Input Voltage	7 VDC
Setpoint Range Cooling	12 to 37.5 C (54 to 100F)
Setpoint Range Heating	4.5 to 32 C (40 to 90 F)
Standards EMC	EMC Directive 2004/108/EC
Standards EMC	FCC 15 Subpart B
Standards EMC	ICES-003
Standards EMC	IEC 61326-1:2005
Standards Safety	CAN.SSA C22.2.NO.24
Standards Safety	EN 60730-2-9
Standards Safety	LVD Directive 2006/95/EC
Standards Safety	UL 873
Storage Humidity	0 to 95 RH non-condensing
Storage Temperature	-30 to 50 C (-22 to 122 F)
Temperature Accuracy	Plus or minus 0.5 C ( Plus or minus 0.9 F) at 21 C (70 F) typical calibrated
Temperature Display Range	-40 to 50 C (-40 to 122 F)
Temperature Proportional Band	Cooling and Heating default 1.8 C (3.2 F)
Temperature Sensor Onboard	Local 10 K NTC type 2 thermistor
Temperature Sensor Resolution	Plus or Minus 0.1 C (Plus or Minus 0.2 F)
Voltage Cool Line	Yellow Wire, 5A maximum
Voltage Fan Line	Brown, Blue, Red Wires 1/2 HP or 13A maximum
Voltage Main Heat	Orange Wire, 10A maximum
Wire Gauge	14 gauge maximum, 22 gauge recommended